Hotline：08620-36453501
Your location：
Multiparameter benchtop pH meter contains 15 options, the meter is suitable for measuring the pH, ORP, ion concentration, conductivity, total dissolved solids (TDS), salinity, resistivity, DO.
pH Mode:
? 1 to 5 points calibration with automatic recognition for USA, NIST and DIN buffers.
? Automatic electrode diagnosis shows the pH slope and offset.
ORP Mode:
? 1 point offset calibration allows adjusting the displayed value to a known standard.
? Relative and absolute millivolt modes ensure the reliable ORP measurements.
Ion Concentration Mode:
? 2 to 5 points calibration, including the 8 concentration points can be selected.
? Direct ion concentration readout simplifies the measurement process.
? Automatic electrode diagnosis shows the calibration points and slopes.
? Selectable concentration units (ppm, mg/L, mol/L, mmol/L) and ionic valency.
Conductivity/TDS/Salinity/Resistivity Modes:
? 1 to 5 points calibration with automatic recognition for conductivity standards.
? Selectable cell constant (K=0.1/1/10), reference temperature (20/25°C), TDS factor, linear
and pure water compensations, seawater and practical salinity measurement modes.
Dissolved Oxygen Mode:
? 1 or 2 points calibration using the air-saturated water or zero oxygen solution.
? Salinity and barometric pressure compensations eliminate the measurement error.
Other Features:
? Automatic temperature compensation ensures accurate readings over the entire range.
? Auto-Read function senses and locks the measurement endpoint.
? Calibration due alarm prompts user to calibrate the meter regularly.
? Setup menu allows setting the number of calibration points, stability criteria, temperature
unit, date and time, auto-power off, etc.
? Reset function automatically resumes all settings back to the factory defaults.
? Expanded memory stores or recalls up to 500 data sets.
? USB communication interface for data transfer and timed interval readings.
Specifications
| Model | Bante900 |
| pH | |
| Range | -2.000 to 20.000 pH |
| Resolution | 0.001 / 0.01 / 0.1 pH, selectable |
| Accuracy | ±0.002 pH |
| Calibration Points | 1 to 5 points |
| pH Buffer Options | USA / NIST / DIN / 2 custom buffers |
| ORP | |
| Range | -1999.9 to 1999.9 mV |
| Resolution | 0.1 / 1 mV, selectable |
| Accuracy | ±0.2 mV |
| Calibration Points | 1 point |
| Measurement Modes | Relative / Absolute mV |
| Ion Concentration | |
| Range | 0.00 to 19999 (depending on the range of ISE) |
| Resolution | 0.001, 0.01, 0.1, 1, automatic |
| Accuracy | ±0.5% F.S. (monovalent), ±1% F.S. (divalent) |
| Calibration Points | 2 to 5 points |
| Calibration Solutions | 0.001 / 0.01 / 0.1 / 1 / 10 / 100 / 1000 / 10000 |
| Measurement Units | ppm, mg/L, mol/L, mmol/L |
| Conductivity | |
| Range | 0 to 20.00, 200.0, 2000 μS/cm, 20.00, 200.0 mS/cm |
| Resolution | 0.001, 0.01, 0.1, 1, automatic |
| Accuracy | ±0.5% F.S. |
| Calibration Points | 1 to 5 points |
| Calibration Solutions | 10 μS / 84 μS / 1413 μS / 12.88 mS / 111.8 mS |
| Temperature Coefficient | 0.0 to 10.0%/°C |
| Pure Water Compensation | Yes |
| Reference Temperature | 20 / 25°C |
| Cell Constant | K=0.1 / 1 / 10 / Custom |
| TDS | |
| Range | 0 to 10.00, 100.0, 1000 ppm, 10.00, 200.0 ppt |
| Resolution | 0.01, 0.1, 1, automatic |
| Accuracy | ±1% F.S. |
| TDS Conversion Factor | 0.1 to 1.0 (default 0.5) |
| Salinity | |
| Range | 0.00 to 80.00 ppt / 0.00 to 42.00 psu |
| Resolution | 0.01 |
| Accuracy | ±1% F.S. |
| Resistivity | |
| Range | 0.00 to 20.00 MΩ |
| Resolution | 0.01 |
| Accuracy | ±1% F.S. |
| Dissolved Oxygen | |
| Range | 0.00 to 20.00 mg/L / 0.0 to 200.0 % saturation |
| Resolution | 0.01 / 0.1, selectable |
| Accuracy | ±0.2 mg/L / ±2.0 % |
| Calibration Points | 1 or 2 points |
| Pressure Correction | 60.0 to 112.5 kPa / 450 to 850 mmHg, manual |
| Salinity Correction | 0.0 to 50.0 g/L, manual |
| Temperature | |
| Range | 0 to 105°C / 32 to 221°F |
| Resolution | 0.1°C/°F |
| Accuracy | ±0.5°C / ±0.9°F |
| Offset Calibration | 1 point |
| Calibration Range | Reading ±10°C/°F |
| Other Specifications | |
| Temperature Compensation | 0 to 100°C / 32 to 212°F, manual or automatic |
| Hold Function | Manual / Auto-read measurement endpoint |
| Stability Criteria | Low / High |
| Calibration Due Alarm | 1 to 31 days or off |
| Memory | Stores up to 500 data sets |
| Output | USB communication interface |
| Connector | BNC, 6-pin mini-DIN, 3.5 mm jack socket |
| Display | Custom LCD (125 × 100 mm) |
| Power Supply | 5V DC power adapter |
| Environmental Conditions | 0 to 50°C / 32 to 122°F, relative humidity < 80% |
| Dimensions | 210 × 188 × 60 mm |
| Weight | 1.5 kg |
